| Description |
Part
No. |
Figure |
General
application switches
Switching power rating of 10 watt. Applications are wide including switching
signal loads, driving electromechanical relays, etc. |
HYR
1532 |
 |
| HYR
2001 |
 |
| HYR
2034 |
 |
| HYR
4001 |
 |
| HYR
5051 |
 |
Ultraminiature
switches
With glass capsule length of 9.5 to 12mm. These switches use very little
space. Applications include miniature reed relays, keyboards, etc. |
HYR
1002 |
 |
| HYR
1003 |
 |
High
power switches
Switching power rating between 20 and 70 Watt. May be used for directly
switching power line voltages, i.e. 1 10 VAC or 220 VAC |
HYR
1531(For 110 VAC) |
 |
| HYR
2003-1(For 220 VAC) |
 |
| HYR
2003-2(high power) |
| HYR
2016(For more than
220 VAC) |
 |
High voltage breakdown switches
Breakdown voltage rated from 1,000 to 2,000 Volt. Reed switches with ratings up to 15 KV are available in larger sizes |
HYR 1559 |
 |
| HYR 2016 |
|
| HYR 5006 |
 |
| HYR 5007 |
| HYR 5008 |
High insulation resistance switch
With I. R. rated at more than 10E + 13 Ohm. |
HYR 2010 |
 |
Low thermal EMF and RF switches
With thermal EMF ratings as low as 5 µV / deg. C (other switches are approx. 40 µV / deg. C). These switches are often applied in test equipment. They may also be used in RF applications due to low insertion loss characteristics. |
HYR 2011 |
 |
High inrush current switches
May be used for switching incandescent lamp or capacitive loads without external current limiting resistors. |
HYR 1506 |
 |
Close differential switches
Feature low magnetic hysteresis between contact closure and opening. |
HYR 2031-1 |
 |
Form "C" switches
Feature break-before-make, single pole double through (SPDT) contacts. |
HYR 1554 |
 |
| HYR 1555 |
 |
| HYR 4003 |
 |
